Healing Pattern Analysis for Dental Implants Using the Mechano-Regulatory Tissue Differentiation Model

(1) Background: Our aim is to reveal the influence of the geometry designs on biophysical stimuli and healing patterns. The design guidelines for dental implants can then be provided. (2) Methods: A two-dimensional axisymmetric finite element model was developed based on mechano-regulatory algorithm. The history of tissue differentiation around eight selected implants can be predicted. The performance of the implants was evaluated by bone area (BA), bone-implant contact (BIC); (3) Results: The predicted healing patterns have very good agreement with the experimental observation. Many features observed in literature, such as soft tissues covering on the bone-implant interface; crestal bone loss; the location of bone resorption bumps, were reproduced by the model and explained by analyzing the solid and fluid biophysical stimuli and (4) Conclusions: The results suggested the suitable depth, the steeper slope of the upper flanks, and flat roots of healing chambers can improve the bone ingrowth and osseointegration. The mechanism related to solid and fluid biophysical stimuli were revealed. In addition, the model developed here is efficient, accurate and ready to extend to any geometry of dental implants. It has potential to be used as a clinical application for instant prediction/evaluation of the performance of dental implants.     

UV/TiO_2光催化氧化工艺脱汞的试验研究

UV/TiO_2光催化技术在TiO_2催化剂的作用下可将烟气中Hg~0氧化脱除。利用自制的UV/TiO_2氧化试验台研究了影响Hg~0去除率的相关因素,结果表明,在无催化剂和有紫外灯情况下可脱除少量Hg~0;Hg~0去除率随催化剂活性组分含量的增加而上升,但上升速率逐渐下降;在温度(50～200)℃范围内,Hg~0去除率无明显变化;Hg~0去除率随着Hg~0初始浓度的升高逐渐下降;Hg~0去除率随着烟气中氧含量先上升后趋于不变。UV/TiO_2氧化工艺脱汞可为燃煤电厂烟气脱汞提供理论指导。     

有色金属工业含砷污染物处理研究进展

综述了有色金属工业砷污染物的来源及其无害化处理的方法,分析了包封固砷(水泥固化和玻璃固化)和矿物固砷(钙盐、铝盐、镁盐、硫化沉淀法)的优缺点和局限性,重点对将砷以臭葱石形式进行安全处理的合成方法和浸出稳定性的研究现状进行阐述。分析表明,晶态臭葱石合成是将砷以臭葱石形式进行安全处置的基础,稳定性是关键,进一步降低溶液过饱和度以实现大尺寸、高稳定性臭葱石的合成是发展方向。     

超级电容器用solvent-in-salt型电解液的研究进展

Solvent-in-salt (SIS)型电解液作为一类新型超浓缩电解液，主要由水或者有机溶剂和易溶盐组成，具有溶液溶剂化程度小、自由溶剂分子少、电化学窗口宽、电化学稳定性高等特点，在超级电容器中显示了独特的优势并展现了良好的应用前景。本文重点综述了SIS型电解液的原理和优势，梳理了近年来SIS作为超级电容器电解液的研究进展，总结了其存在的问题，同时展望了SIS型电解液未来的发展方向。     

激光淬火对高速动车组EA4T车轴钢组织和性能的影响

为提高EA4T车轴钢的表面硬度和耐磨性能,采用激光淬火对调质态车轴进行表面改性。利用扫描电镜、显微硬度计、纳米压痕仪等对激光淬火层的微观组织、相变层深度和硬度进行了详细的表征。结果表明:EA4T车轴钢表面经过不同工艺激光淬火后,相变层内的淬火组织主要由细小的板条马氏体和粒状贝氏体组成,其深度根据工艺不同从100 μm到800 μm不等,并呈现随淬火功率的增加和扫描速度减小,相变层深度逐渐增加的趋势。淬火相变层区域内,车轴钢的显微硬度基本保持在450 HV0.2左右,约为基体硬度的2倍,耐磨性显著提高。由于淬火道次之间搭接的原因,淬火层呈现波形分布,其中波谷马氏体含量高于波峰位置,因此其硬度明显高于波峰处。     

Novel thermal-sensitive properties of NBT-BZT composite ceramics for high-temperature NTC thermistors

We found for the first time that (1 − x) Na_0.5Bi_0.5TiO₃-xBiZn_0.5Ti_0.5O₃ (NBT–BZT) composite ceramics showed negative temperature coefficient (NTC) at a high temperature. The NBT–BZT nanopowders were successfully prepared by Pechini method. Their ceramics were sintered at 1100°C. The NBT–BZT ceramic exhibited a good linear relationship between logarithm of electrical resistivity (Inρ) and reciprocal of absolute temperature (1000/T) at 250°C–1050°C. The obtained ρ₆₀₀, ρ₉₀₀, and B_600/900 constants of the NBT–ZBT NTC thermistors are approximately 5.92 × 10⁶ to 3.01 × 10⁴ Ω cm, 7.03 × 10³ to 7.60 × 10² Ω cm and 2.3 × 10⁴-1.3 × 10⁴ K, respectively. The electrical characteristics can be tuned to the desired value by changing the Na_0.5Bi_0.5TiO₃ content in the compound. The electrical conductivity in these compounds is due to the electron jumps between Ti³⁺ and Ti⁴⁺ and oxygen-ion conductivity. Results demonstrate a tremendous potential of the studied system for perovskite materials with NTC performance.     

Correlation between B value deviation and sintering temperature of perovskite solid solution materials

The effects of different sintering temperatures on the system of Ba_0.5Sr_0.5TiO₃–La_0.8Ca_0.2MnO₃ (BST-LCM) material were investigated by means of scanning electron microscopy, X-ray, resistance-temperature measurements, and X-ray photoelectron spectroscopy. X-ray diffraction and X-ray photoelectron spectroscopy confirm that BST-LCM is completely miscible and BST is the main phase, which under the premise of following the theory of small polaron conduction, titanium ions interact with manganese ions, which affects the electrical properties of the system of BST-LCM material. For the electrical properties of related, the LCM content is inversely proportional to the activation energy. Through the linear fitting of the experimental data, the empirical formula between the sintering temperature B value and the content of solid solution is obtained, and the approximate B value within a certain range can be preliminarily calculated.     

pazopanib血药浓度个体差异与细胞色素P450 3A4基因多态性的关系初探

目的：分析健康受试者口服pazopanib片后体内药代动力学（PK）规律，初步探讨pazopanib片PK个体差异的遗传学机制。方法：14例健康男性受试者分别在给药当天单次口服pazopanib片（200 mg）后，采集基线至96 h血液样本，用LC-MS/MS法测定服药后各时间点血药浓度，用WinNonlin 6.3软件计算药代动力学相关参数，采用SNapShot法测定细胞色素P450 3A4（CYP3A4）基因多态性。结果：Cmax变化范围（7 361.65-26 081.00） ng/mL，平均值±标准差（15 410.72±6 366.21） ng/mL ；tmax变化范围（1.50-4.00） h、平均值±标准差（2.50±0.83） h；AUC0-t变化范围（228 013.55-775 231.63）ng·mL-1·h，平均值±标准差（516 279.90±175 688.41）ng·mL-1·h。个体间Cmax、AUC相差达3倍以上，tmax可相差2倍以上；14例受试者CYP3A4（RS35599367）位点皆为野生型。结论：pazopanib片在中国健康男性志愿者中个体差异较大，未观察到CYP3A4（rs35599367）位点单核苷酸多态性，pazopanib个体间PK差异可能与其他药物代谢相关基因多态性有关。     

Research on the overall architecture of Internet of Things middleware for intelligent industrial parks

With the continuous development of the Internet of Things technology and the proposal of “Made in China 2025”, the construction of IoT applicat